4,809 research outputs found
La apoteosis del investigador y la institucionalización de la profesión académica en Chile
El estudio del profesorado universitario en
América Latina revela una profesión académica heterogénea
en sus perfiles y funciones, segmentada en sus
ámbitos de ejercicio, y estratificada en cuanto a su posición
social. La investigación que aquà se reporta, basada
en estudios de caso de doce universidades chilenas
–con un primer levantamiento de datos en
2001-2002, y un segundo trabajo de terreno en las mismas
universidades en 2007-2008– complementa este
análisis poniendo de relieve la influencia modeladora
del académico investigador sobre el conjunto de la profesión.
No obstante su condición de minorÃa en las universidades
chilenas, el perfil del profesor investigador
domina tanto en el plano de los ideales, el discurso y
los valores, como en la configuración de las polÃticas y
regulaciones que rigen el trabajo académic
Kinetics of the template-directed oligomerization of guanosine 5'-phosphate-2-methylimidazolide: Effect of temperature on individual steps of reactionion
Non-enzymatic, template-directed reactions have been proposed as models for prebiological polynucleotide synthesis. Chemically activated mononucleotides react in the presence of a polynucleotide, acting as the template in a Watson-Crick base-pairing fashing, and form the complementary daughter polynucleotide. Phosphoimidazolide-activated nucleotides have been used successfully as substrates in these reactions. The kinetics of the guanosine 5'-monophosphate-2-methylimidazolide (2-MelmpG) reaction in aqueous pH 8.0 solutions in the presence and in the absence of polycytidylate (poly(C)) were studied, acting as the template at 6, 23, and 37 C. In the absence of the template, the major reaction pathway of 2-MelmpG is hydrolysis of the P-N bond to form the unreactive guanosine 5'-monophosphate (5'-GMP) and 2-methylimidazole. Concentrated solution of 2-MelmpG (greater than 0.02 M) in the absence of the template form only a small amount dinucleotide, (pG)2, but in the presence of poly(C), oligoguanylates, (pG)n with 2 less than or = n less than or = 40, can be detected. We were able to determine the rate constants for individual steps of this reaction. A summary of the conclusions is presented
A demonstrator for the experimental assessment of the through-process modeling of injection-molded parts made of short-fiber-reinforced polymers
Through process modelling of injection moulded parts is nowadays the industry standard approach to the structural analysis of parts made of short fibre-reinforced polymers. The designer has to face challenging tasks, in order to conduct accurate and reliable analyses. Complex geometries, weld lines and multiple flows make it difficult to transfer results of tests conducted on simple specimens to the assessment of the real parts. We have designed a mould allowing for manufacturing a demonstrator, i.e., a part of sufficiently complex shape, typical of injection-moulded structural parts, allowing for creating different conditions in terms of fibre orientation, presence of weld lines and multiple injection points. The part is designed to be tested under three- or four-point bending conditions. By simulating the test conditions, the designer can compare experimental results with numerical solutions, in order to better understand the potential of the software packages he is using
A demonstrator for the experimental assessment of the through-process modeling of injection-molded parts made of short-fiber-reinforced polymers
Through process modelling of injection moulded parts is nowadays the industry standard approach to the structural analysis of parts made of short fibre-reinforced polymers. The designer has to face challenging tasks, in order to conduct accurate and reliable analyses. Complex geometries, weld lines and multiple flows make it difficult to transfer results of tests conducted on simple specimens to the assessment of the real parts. We have designed a mould allowing for manufacturing a demonstrator, i.e., a part of sufficiently complex shape, typical of injection-moulded structural parts, allowing for creating different conditions in terms of fibre orientation, presence of weld lines and multiple injection points. The part is designed to be tested under three- or four-point bending conditions. By simulating the test conditions, the designer can compare experimental results with numerical solutions, in order to better understand the potential of the software packages he is using
Grids of stellar models. VIII. From 0.4 to 1.0 Msun at Z=0.020 and Z=0.001, with the MHD equation of state
We present stellar evolutionary models covering the mass range from 0.4 to 1
Msun calculated for metallicities Z=0.020 and 0.001 with the MHD equation of
state (Hummer & Mihalas, 1988; Mihalas et al. 1988; D\"appen et al. 1988). A
parallel calculation using the OPAL (Rogers et al. 1996) equation of state has
been made to demonstrate the adequacy of the MHD equation of state in the range
of 1.0 to 0.8 Msun (the lower end of the OPAL tables). Below, down to 0.4 Msun,
we have justified the use of the MHD equation of state by theoretical arguments
and the findings of Chabrier & Baraffe (1997).
We use the radiative opacities by Iglesias & Rogers (1996), completed with
the atomic and molecular opacities by Alexander & Fergusson (1994). We follow
the evolution from the Hayashi fully convective configuration up to the red
giant tip for the most massive stars, and up to an age of 20 Gyr for the less
massive ones. We compare our solar-metallicity models with recent models
computed by other groups and with observations.
The present stellar models complete the set of grids computed with the same
up-to-date input physics by the Geneva group [Z=0.020 and 0.001, Schaller et
al. (1992), Bernasconi (1996), and Charbonnel et al. (1996); Z=0.008, Schaerer
et al. (1992); Z=0.004, Charbonnel et al. (1993); Z=0.040, Schaerer et al.
(1993); Z=0.10, Mowlavi et al. (1998); enhanced mass loss rate evolutionary
tracks, Meynet et al. (1994)].Comment: Accepted for publication in A&A Supplement Serie
A complete characterization of plateaued Boolean functions in terms of their Cayley graphs
In this paper we find a complete characterization of plateaued Boolean
functions in terms of the associated Cayley graphs. Precisely, we show that a
Boolean function is -plateaued (of weight ) if and only
if the associated Cayley graph is a complete bipartite graph between the
support of and its complement (hence the graph is strongly regular of
parameters ). Moreover, a Boolean function is
-plateaued (of weight ) if and only if the associated
Cayley graph is strongly -walk-regular (and also strongly
-walk-regular, for all odd ) with some explicitly given
parameters.Comment: 7 pages, 1 figure, Proceedings of Africacrypt 201
Desarrollo de la competencia resolución de problemas en el área de matemática en el nivel educativo primario de Uruguay. Factores asociados
La ponencia se basa en la tesis, presentada por quien suscribe, para la obtención del tÃtulo de MaestrÃa en Evaluación de PolÃticas Públicas, en la Universidad ORT de Uruguay, en el mes de abril del año 2004.
El desarrollo de la investigación estuvo dirigido al área de Educación y analizó la incidencia de factores asociados al desarrollo, en el área de Matemática, de la competencia Resolución de Problemas.
La investigación partió de un modelo teórico de función de producción educativa, construido en base a indicadores generados a partir de la Evaluación Muestral del año 1999 en Matemática y Lenguaje en el último grado del ciclo primario (6to. año) en Uruguay. Este modelo permitió explicar parte de la variación de los logros académicos en la competencia seleccionada en base a indicadores de los insumos y de los procesos presentes en los aprendizajes de la competencia analizada.
El modelo consideró como indicador de logro, el resultado en puntuación TRI obtenida por los alumnos. A partir de la fundamentación teórica y de los antecedentes en estudios similares, realizados hasta la fecha, se propuso una serie de dieciocho factores relacionados con los logros.
Se realizó un análisis bivariado y trivariado de otros factores no presentes en el modelo pero que sà figuran en la literatura sobre el tema y de los cuales se poseen datos.
El modelo hipotetizado fue sometido a análisis estadÃstico aplicando técnicas multivariadas y multinivel. Luego de realizar los ajustes que exige la validez de los mismos se llegó a dos modelos finales que intentan explicar con el mÃnimo de factores el máximo de varianza.
En este análisis los modelos distinguen la significación de los siguientes predictores, a nivel:
del alumno y su familia: experiencia de repetición (asociación negativa); asistencia a preescolar; gusto por la asignatura, motivación por el estudio; percepción de aprendizaje activo en matemática; existencia de libros en el hogar; altas expectativas de los padres sobre los futuros estudios del hijo; clima grupal escolar agradable y alta autoestima. Estas dos últimas variables solamente presentaron efectos aleatorios.
de los docentes y la escuela: edad del maestro de clase; gusto del maestro de clase por la asignatura; actualización docente del maestro de clase (asociación negativa); frecuentación de la competencia evaluada; existencia en la escuela de un plan en Matemática; experiencia del maestro director (asociación negativa); número de alumnos de la escuela y una enseñanza basada en el desarrollo de los conocimientos. Estas últimas dos variables presentes solamente en el análisis multivariado.
El estudio asimismo permitió determinar la inexistencia de diferencias, en los logros de la competencia estudiada, entre escuelas de Montevideo e Interior y entre escuelas públicas y privadas. Se observaron diferencias con efectos aleatorios entre varones y niñas (mejores resultados para los varones en algunos de los grupos de la muestra)
- …